- Integrated sensor and power box in one unit and using the spring clamps for easy and quick installation
- This presence detector provides multi-functions of PIR movement detector and light level detector
- Can be programmed by IR remote control for easy and quick settings.
- The ambient Lux value can be learned by IR remote control as the threshold for switching on / off / dim the loads.
- A red LED is equipped as an indicator for test triggering and IR setting.
- Multi-functions are provided such as switching on and off, dimming the lighting, also can do lighting scenery setting
- Easy wiring as no polarity for connecting for DALI wires
- Manual operation function is feasible by connecting with a N.O. type pushbutton switch to control.
- Rated voltage: 220 - 240 V - 50/60Hz
- Output : Max. SOpcs DALI electronic ballasts or DALI LED drivers can be connected
- Power consumption: Approx. 0.5W
- Detection range : 360°, max. Ø6m at 2.5m height (2m - 5m installable)
- Lux adjustment : fixed value: 300 Lux, but other vaIues can be selected by remote control
- Auto off time adjustment : fixed value 3min, but other values can be selected by remote control
- Load on time in standby mode: can only be set by IR remote control
- Load on illumination in standby mode：value can be selected by remote control
- Cable connection： 5 wires (Double isolated 300mm long)
- Installation hole : Ø38mm
- Operating temperature : - 10°C to + 50°C
- Environmental protection: IP55