Flush Mount Presence Detector 2-Channel


  • Extremely flat and integrated housing design with spring clamps for easy and quick installation.
  • With two channels for lighting & HVAC control. 
  • To enlarge the detection range by connecting the slave detector to master detector, max. 10pcs slave detectors can be connected.
  • Can be programmed by IR remote control for easy and quick settings, especially to provide alternative function of auto / semi-auto mode (note: The IR remote control is strongly recommended to purchase).
  • The ambient Lux value can be learned as the threshold for switching on / off the loads.
  • A red LED is equipped as an indicator for test triggering and IR setting.
  • Rated Voltage  : 220 - 240V~ 50 / 60Hz
  • Load :           
    •       LoadⅠ(CH1) for Lighting
        • Incandescent Lamp: max. 2000W
        • AC Halogen Lamp: max. 1000W
        • LV Halogen Lamp: max. 1000VA / 600W
        • Fluorescent Lamp: max. 900VA / 100μF 
          • 25 x (1 x 18W); 15 x (1 x 36W); 10 x (1 x 58W)
          • 12 x (2 x 18W); 7 x (2 x 36W); 5 x (2 x 58W) 
          • max. 1000VA / 600W (uncompensated)
        • LED Lamp: max. 400W
        • Energy Saving Lamp: max. 600VA / 400W (include CFL & PL lamp)
    •       Load Ⅱ(CH2) for HVAC (voltage free contact):
        • Max. 5A (cosφ=1) for ≦250VAC 
        • Max. 5A for ≦30VDC
        • Max. 1A (cosφ=0.4) for ≦250VAC 
  • Detection Range: 360º circular, up to Φ9m at height of 2.5m     
  • Lux Adjustment: adjustable from approx. 5Lux to 2000Lux and Learning (range: 5Lux - 2000Lux)              
  • Auto Off Time Adjustment:
      • Time 1 (for lighting): adjustable from approx. 5sec to 30min and Test & Short impulse (1sec)
      • Time 2 (for HVAC)  : adjustable from approx. 10sec to 60min
  • Environmental Protection: IP44
  • Operating  Temperature: -20°C to +45°C




Go To Top